Lifetime Warranty for All Cables Shop Now!

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

More About Shielded Universal Power Cords

CableLeader is your trusted source for high-quality Shielded Universal Power Cords, offering a wide range of lengths and connectors to suit your power needs. Our selection includes the NEMA5-15P/C13 SHIELDED 6FT and NEMA5-15P/C13 SHIELDED 12FT power cords, perfect for powering monitors, computers, printers, scanners, TVs, sound systems, and many other devices with IEC-60320-C14 inlets.

Our shielded power cords feature:
NEMA 5-15P and IEC-60320-C13 connectors for compatibility with a wide range of devices
18 AWG x 3C shielded SVT conductors for reliable power delivery and reduced noise interference
10A/125V rating for safe operation with most electronics

These power cords are ideal for replacing damaged, overused, or missing cords in your home or office. Fully molded construction ensures durability, while protective foil shielding reduces noise interference for optimal performance. Trust CableLeader for UL, cUL listed, and CSA approved power cords that comply with RoHS and REACH directives, ensuring both quality and safety.

Shielded Universal Power Cords: Reliable Power Delivery with Noise Reduction

Introduction

Shielded universal power cords, also known as shielded power cables or shielded computer power cords, are essential components for powering a wide range of electronic devices, including monitors, computers, printers, TVs, and sound systems. These specialized cables feature a protective shielding layer that helps reduce electromagnetic interference (EMI) and electrical noise, ensuring optimal performance and reliable power delivery.

Connectors and Specifications

CableLeader's shielded universal power cords are designed with industry-standard connectors, such as the NEMA 5-15P and IEC-60320-C13, ensuring compatibility with a variety of devices. These power cords are constructed with 18 AWG x 3C shielded SVT conductors, providing a robust and durable solution for your power needs. With a 10A/125V rating, they can safely handle the power requirements of most electronics.

Shielding and Noise Reduction

The key feature of shielded universal power cords is their protective foil shielding, which acts as a barrier against electromagnetic interference (EMI) and electrical noise. This shielding helps prevent external interference from affecting the performance of connected devices, ensuring optimal signal quality and reducing the risk of data corruption or system malfunctions.

Benefits of Shielding

Minimizes electromagnetic interference (EMI) and electrical noise
Ensures reliable power delivery and signal integrity
Reduces the risk of data corruption or system malfunctions
Enhances overall performance and stability of connected devices

Durability and Safety

CableLeader's shielded universal power cords are designed with durability in mind. The fully molded construction ensures long-lasting performance, while the shielding layer provides an additional layer of protection against wear and tear. These power cords are UL, cUL listed, and CSA approved, ensuring compliance with industry safety standards. Additionally, all materials used in the manufacturing process comply with RoHS and REACH directives, prioritizing environmental responsibility.

Applications and Versatility

Shielded universal power cords are versatile and suitable for a wide range of applications, including home and office environments. They are ideal for replacing damaged, overused, or missing power cords, ensuring a reliable and consistent power supply for your devices. Whether you need to power a computer, monitor, printer, TV, or sound system, these shielded power cords offer a reliable and high-performance solution.

Conclusion

CableLeader's shielded universal power cords are a premium choice for powering your electronic devices. With their robust construction, protective shielding, and compliance with industry standards, these power cords ensure reliable power delivery while minimizing the effects of electromagnetic interference and electrical noise. Invest in CableLeader's NEMA5-15P/C13 SHIELDED 6FT or NEMA5-15P/C13 SHIELDED 12FT power cords and experience the difference in performance and peace of mind.

Should power cables be shielded?

Shielding is needed to combat the effects of EMI (Electromagnetic Interference). Cables can be a main source of transfer for EMI, both as a source and receiver. As a source, the cable can either conduct noise to other equipment or act as an antenna radiating noise. As a receiver, the cable can pick up EMI radiated from other sources. Shielded Universal Power Cords from CableLeader feature protective foil shielding to reduce noise interference for optimal performance.

What happens if you don't ground a shielded cable?

If you do not ground the shield, EMI will induce voltages in the shield which will also be seen on the signal owing to the capacitance effect of the coaxial cable. Proper grounding of the shield is essential to prevent this interference.

How do you connect a shielded power cord?

To connect a shielded power cord:

Strip the insulation close to the cable ends (typically within the last 10 cm)
Mount the earthing clamps on an earthed metal piece close to the controller and motor
Plug the shielding of the cable into the earthing clamp

Proper shielding and grounding ensure EMI protection for your devices when using Shielded Universal Power Cords from CableLeader.

What is the difference between shielded and unshielded power cords?

Shielded cables provide a higher level of protection against interference, ensuring reliable signal transmission. Unshielded cables are typically less expensive and easier to install, making them a good choice for simpler applications where interference is less of a concern. CableLeader's Shielded Universal Power Cords offer superior EMI protection for your electronics.

What is the difference between shielded cable and normal cable?

Shielded cables are usually thicker and more rigid than unshielded cables. They also require greater care when working with them. Shielded cables are most often found in industrial settings and installations where other nearby equipment is likely to generate electromagnetic interference. CableLeader's Shielded Universal Power Cords are designed for reliable power delivery in environments with potential EMI sources.

More About Shielded Universal Power Cords

Shielded Universal Power Cords: Reliable Power Delivery with Noise Reduction

Introduction

Connectors and Specifications

Shielding and Noise Reduction

Benefits of Shielding

Minimizes electromagnetic interference (EMI) and electrical noise
Ensures reliable power delivery and signal integrity
Reduces the risk of data corruption or system malfunctions
Enhances overall performance and stability of connected devices

Durability and Safety

Applications and Versatility

Conclusion

Should power cables be shielded?

What happens if you don't ground a shielded cable?

How do you connect a shielded power cord?

To connect a shielded power cord:

Strip the insulation close to the cable ends (typically within the last 10 cm)
Mount the earthing clamps on an earthed metal piece close to the controller and motor
Plug the shielding of the cable into the earthing clamp

Proper shielding and grounding ensure EMI protection for your devices when using Shielded Universal Power Cords from CableLeader.

()

Shielded Universal Power Cords

Product List

6ft NEMA 5-15P to C13 Shielded Heavy Duty Universal Power Cord, 14 AWG, 15A/125V, SJT, Black

More About Shielded Universal Power Cords

Shielded Universal Power Cords: Reliable Power Delivery with Noise Reduction

Introduction

Connectors and Specifications

Shielding and Noise Reduction

Benefits of Shielding

Durability and Safety

Applications and Versatility

Conclusion

Should power cables be shielded?

What happens if you don't ground a shielded cable?

How do you connect a shielded power cord?

What is the difference between shielded and unshielded power cords?

What is the difference between shielded cable and normal cable?

More About Shielded Universal Power Cords

Shielded Universal Power Cords: Reliable Power Delivery with Noise Reduction

Introduction

Connectors and Specifications

Shielding and Noise Reduction

Benefits of Shielding

Durability and Safety

Applications and Versatility

Conclusion

Should power cables be shielded?

What happens if you don't ground a shielded cable?

How do you connect a shielded power cord?

What is the difference between shielded and unshielded power cords?

What is the difference between shielded cable and normal cable?

Contact Us

Find Us

Customer Services

Information

Find Us