8in HDMI Male to Female Extension Cable Port Saver 30AWG High Speed v1.4, Black

8in HDMI Male to Female Extension Cable Port Saver 30AWG High Speed v1.4, Black 

This 8-inch HDMI male to female extension cable provides a short, flexible link between HDMI source devices and displays. Built to the HDMI 1.4 High Speed specification with 30 AWG conductors, it supports 4K video at 30Hz, Full HD 1080p at 60Hz, 3D content, Audio Return Channel, and HDMI Ethernet Channel. The compact 200mm length makes it a practical port saver for televisions, gaming consoles, streaming sticks, and AV equipment where a full-length extension cable is unnecessary. Gold-plated Type A connectors on both ends ensure reliable signal transfer and long-term durability. 

The HDMI Type A male connector features a standard 19-pin configuration with gold-plated contacts and a gold-plated shell. Gold plating provides corrosion resistance and maintains low contact resistance even after repeated insertion and removal cycles. The connector housing uses black insulation material that grips securely into any standard HDMI female port. A boarding cap protects the male connector during shipping and storage, keeping the gold-plated pins free from dust and physical damage before installation. 

The HDMI Type A female connector on the opposite end accepts any standard HDMI male plug, including those from streaming devices, gaming consoles, Blu-Ray players, and cable boxes. The 19-pin female receptacle is gold-plated to match the male end, providing uniform contact quality across the entire signal path. The connector body measures 37.3mm in length with a compact 9.2mm profile, allowing it to fit in tight spaces behind wall-mounted televisions and inside AV cabinets without blocking adjacent ports. 

Every unit passes three-stage quality testing at the factory: 100% short circuit testing to verify no unintended connections between pins, open circuit testing to confirm all 19 pins conduct properly, and misalignment testing to ensure mechanical alignment of both connectors. Insulation resistance is measured at a minimum of 10 Mohm under 300V DC over a 10-millisecond test cycle, and conduction impedance is held to a maximum of 3 Ohm per conductor. The PVC jacket is rated for standard indoor operating environments and provides flexibility for routing in confined installation spaces. 

The 8-inch cable length serves two primary functions. As a port saver, it moves the physical connection point away from the device HDMI port, absorbing the mechanical stress of cable insertion and removal that would otherwise wear down the built-in connector on a television, receiver, or graphics card. As a streaming stick extender, it positions devices like Amazon Fire Stick, Roku Streaming Stick, and Google Chromecast away from the back panel of the TV, improving WiFi signal reception and reducing heat buildup from nearby electronics. The 30 AWG wire gauge and 6.0mm outer diameter keep the cable lightweight and flexible enough to route behind displays without creating a visible cable profile. Aluminum-Mylar foil shielding with a drain wire provides effective EMI protection for maintaining 4K signal integrity over the short transmission distance. 

This HDMI extension cable combines a short-reach form factor with HDMI 1.4 High Speed performance in a 30 AWG, gold-plated package. The 8-inch length is purpose-built for port protection and streaming device positioning rather than long-distance cable extension. Compatible with any HDMI Type A device, it delivers 4K@30Hz video, 1080p@60Hz, 3D, ARC, and Ethernet channel support through a fully shielded, factory-tested cable assembly suitable for home entertainment systems, gaming setups, classroom displays, and conference room installations. 

FAQ 

What resolution does this HDMI extension cable support? 

This cable supports up to 4K (3840x2160) resolution at 30Hz and Full HD 1080p at 60Hz. It is built to the HDMI 1.4 High Speed specification with 10.2 Gbps bandwidth, which also enables 3D video, Audio Return Channel, and HDMI Ethernet Channel. For 4K content at 60Hz or HDR, an HDMI 2.0 cable is required. 

Will this short HDMI extension cable work with my Fire Stick, Roku, or Chromecast? 

Yes. This 8-inch HDMI male to female cable is compatible with Amazon Fire Stick, Roku Streaming Stick, Google Chromecast, and other HDMI dongle-style streaming devices. The short length moves the streaming device away from the back panel of the TV, which can improve WiFi signal reception and allow the device to fit behind wall-mounted televisions. 

Does an HDMI extension cable reduce signal quality? 

At 8 inches (0.2 meters), this cable introduces no measurable signal degradation. HDMI signal loss becomes a concern at lengths beyond 15 meters (50 feet) for passive cables. The gold-plated connectors and aluminum-Mylar foil shielding on this cable maintain signal integrity across all 19 pins over the short transmission distance. 

What is an HDMI port saver and why would I need one? 

An HDMI port saver is a short male-to-female extension cable that plugs directly into a device HDMI port and transfers the mechanical stress of cable connections to the extension cable instead of the device port. This prevents wear and potential damage to HDMI ports on televisions, gaming consoles, and AV receivers that undergo frequent cable plugging and unplugging. 

What is the difference between HDMI 1.4 and HDMI 2.0? 

HDMI 1.4 supports 4K at 30Hz with 10.2 Gbps bandwidth, while HDMI 2.0 supports 4K at 60Hz with 18 Gbps bandwidth and adds HDR and wider color space support. Both use the same physical Type A connector and are fully backward compatible. HDMI 1.4 is sufficient for most streaming content, Blu-Ray playback, and gaming at 1080p or 4K@30Hz.