14 inches NEMA 5-15P to Dual 5-15R Power Extension Cord Splitter 16AWG 13A/125V SJT, Black

The NEMA 5-15P to dual NEMA 5-15R Y-splitter power cord lets a single 125V wall outlet supply two devices at once. One standard three-prong NEMA 5-15P plug feeds a molded Y-junction that splits into two NEMA 5-15R receptacles, so two devices plug in through one cord instead of competing for outlets. It works as a short extension between a wall outlet and two nearby devices, built for desktops, offices, and workspaces where grounded outlets are limited.

The NEMA 5-15P plug is the standard US 2-pole, 3-wire grounding connector found on 125V household and office outlets. It carries line, neutral, and ground into the splitter through a single 16 AWG three-conductor cord. Because the input is a standard wall plug, this splitter draws directly from any 125V outlet, power strip, or surge protector, with no special circuit or adapter required.

Each output is a NEMA 5-15R receptacle, the same grounded female outlet found on wall plates and power strips, so it accepts any standard US three-prong device cord. The two outlets share the cord's single 13A/125V feed, so the combined load of both connected devices must stay within 13 amps. This suits low-draw equipment such as monitors, desktop computers, and chargers rather than two high-wattage appliances at the same time.

The cord uses UL-recognized SJT cordage (files E204978 and E210037) rated 300V, 75 degrees C, and VW-1 flame retardant, with CSA-marked molded connectors (file 204790) and full RoHS compliance. The three 16 AWG conductors are stranded copper, giving a heavier cross-section than the 18 AWG cordage used in most comparable outlet splitters and keeping voltage drop low under a continuous shared load.

Common deployments include running two monitors from one outlet on a dual-display workstation, powering a desktop and its monitor through one socket, or feeding a printer next to a scanner. Because the outputs are standard outlets rather than IEC inlets, the same splitter also powers lamps, chargers, and small office appliances. In server rooms and AV racks, it frees up power-strip and PDU sockets and reduces cable clutter.

The black jacket provides a professional appearance and suits standard data center and enterprise rack deployments.

Compatibility & Ordering Information: This splitter connects any standard 125V NEMA 5-15R outlet, power strip, or surge protector to two devices that use a standard three-prong NEMA 5-15P plug. It does not convert voltage and is rated for indoor use with its SJT jacket, not outdoor SJTW applications. Keep the total draw of both devices within 13A/125V. The cord is available in 14 in, 24 in (2 ft), 36 in (3 ft), and 72 in (6 ft) lengths to match your outlet-to-device distance.

Product Comparison: Outlet Splitter vs. Single Extension Cord vs. C13 Splitter

FAQ

What is the difference between a NEMA 5-15P to 2x 5-15R outlet splitter and a standard NEMA 5-15P to 5-15R extension cord?

An outlet splitter has one NEMA 5-15P wall plug and two 5-15R outlets, so it powers two devices from one outlet; a standard extension cord has one plug and one outlet for a single device. The splitter shares a single 13A/125V feed between both outlets. It is also different from a 3-way splitter, which provides three outlets instead of two.

Is this splitter compatible with my computer and monitor?

Yes - any device with a standard three-prong NEMA 5-15P plug fits, including desktop computers, monitors, printers, lamps, and chargers. Both outlets are standard grounded 5-15R receptacles, and the NEMA 5-15P end goes into any 125V wall outlet or power strip. Confirm the combined draw of both devices stays within 13A/125V.

What is the amp rating, and how much can I plug into both outlets?

This splitter is rated 13A at 125V, up to 1,625 watts total shared across both outlets. The 16 AWG (16/3) stranded copper conductors are a heavier gauge than the 18 AWG used in most splitters, carrying more current with lower voltage drop. Add the wattage of both devices before connecting so the combined load stays under 13 amps.

How do I connect this power cord splitter?

Plug the single NEMA 5-15P end into a standard 125V wall outlet, power strip, or surge protector. Plug each device's cord into one of the two NEMA 5-15R outlets until it seats fully. Confirm both connections are firm and that the total draw of both devices stays within 13A/125V before powering them on.

Which outlet splitter is best for running two devices from one outlet?

A NEMA 5-15P to 2x 5-15R splitter is the right choice when both devices use standard three-prong plugs and draw from a 125V wall outlet. Choose 16 AWG over 18 AWG for a heavier-gauge cord and lower voltage drop. For indoor use choose this SJT-jacketed cord; for IEC-inlet IT gear such as computers and monitors with C14 inlets, choose a 5-15P to 2x C13 splitter instead.